& Working material:aluminium profile, sheet material, window and curtain wall profile 3 surface
& Launder ,mounting hole, locking hole, heterotypic hole, ending milling
& Need 180° any angel process with 24000rpm strong spindle to get 0.05mm high accuracy milling and drilling,taping works under 80m/min moving speed
& Need loading material interactively without stopping works
1 Summarize: It adapts to complex parts processing of all kinds of aluminum, copper, PVC, industrial profiles , which can make work piece finish work of milling, drilling, tapping automatically with one clamping. With T workbench to finish processing clamping of complex parts
2 Model: "LH3500-D5"
3 Performance and Options:
Using moving beam moving column gantry frame structure, run more smoothly, improve the machining rigidity
The base of the lathe bed adopt high strength and two aging treatment to eliminate stress.
It adapts to complex parts processing of all kinds of aluminum, copper, PVC, industrial profiles , which can make work piece finish work of milling, drilling, tapping automatically with one clamping.
It adopts imported high-end CNC control system of Italian OUSAI, well-known brand, easy to operate
It adopts high quality imported servo motor, ball screw, linear guide rail pair and bearing to ensure that the equipment has high machining accuracy, high stability, reliability. Feed movement by pre-stretching guarantee the stability of the machining accuracy
This machine adopts imported five-axis milling head. It can finish processing at any angle of all surfaces except bottom surface
It ensures the stability of the machine accuracy by quantitative timed centralized automatic feed lubrication
It adopts imported rennie salt interferometer detection to compensate the accuracy of machine tools
Using safety protection function ensure safety
With cutting function
With the tip following function, convenient to programming operation
With automatic tool-setting function
With servo turntable and five-axis machine to cooperate with each other to form 5 + 1.
4 Electrical component
The machine adopts advanced numerical control system, principal axis and driven axis power components configure independently. Control axis X, Y, Z, B, C which are three coordinate axis and principal axis, five-axis linkage. Combined with modular structure of driven system make sure installation is simple and reliable. Numerical control system can fully meet the standards of the milling machine tool, it is suitable for single processing and mass production.
4.1 Hardware configuration
Control axis: X, Y, Z, B, C three coordinate axis and two rotation axis
Linkage axis: X, Y, Z, B, C five axis linkage freely
Monitor: 17 "/ 7" color display, display text for Chinese/English.
4.2 CNC function
Minimum resolution: straight axis 0.001 mm
Compensation function: backlash compensation, screw pitch error compensation, a more flexible tool length and tool radius compensation
Feed function: fast feed, feed rate, feed rate adjustment, feed rate per minute, programmable acceleration limit, following pattern, the interpolation feed rate, fixed point stop function
Main function: spindle speed function, spindle rate adjustment, spindle speed limit
FRAME function: coordinate translation, rotation, mirror and scaling, can be set zero bias, programmable zero bias, flexible tapping
4.3 Type of interpolation
Positioning, accurate stop, three-dimensional linear interpolation, any two coordinates arc interpolation, five-axis linkage milling, helix interpolation, feed suspended, synchronous cutting.
4.4 Operating mode
AUTO mode, MDA mode, JOG mode , incremental mode, single way procedures section mode
4.5 Editing function
Procedures section retrieval, Program number retrieval, the background editing, program protection
4.6 Display function
Current position display, actual cutting speed display, program display, program error display, alarm information display, self-diagnosis function display, NC and PLC state signal output display
4.7 Safety protection function
Program testing function, the programmable processing area limit, Software limit monitoring, emergency stop, static monitoring, speed monitoring, Position monitoring, contour monitoring.
4.8 Data transmission
Through the USB interface to make data input and output
|X-way speed||0~80m/min||Main shaft speed/power||0~24000r/7.5kw|
|Y-way speed||0~30m/min||Diameter of blade||¢80~¢150mm|
|Z-way speed||0~30m/min||Cutter magazine||ISO30 9 cutter position|
|Main shaft rotation range||-90°~+90°||Cutting tool installation length||150mm|
|Top surface, standard clamp device||7000×600×400mm||Clamp station||8|
|Top surface, special clamp device||7000×900×400mm||Air pressure||0.5~0.8Mpa|
|Top & side surface, standard clamp device||7000×400×400mm||Air consumption||60L/min|
|Locating accuracy||±0.07mm||Input power||13kw|
|Repeat accuracy||±0.02mm||Voltage||380V/220V/415V 50/60Hz|
|Cutting surface roughness||Ra12.5µm||Weight||4500kg|
Main parts configuration:
|High-speed Five-Axis Gantry Machining Center LH3500-D5|
|No. ||Main components brand|
|1||CNC system: Italy OSAI|
|2||Servo motor: Japan Yaskawa|
|3||Reducer: X axis: Taiwan APEX|
|4||Spindle: Italy Hiteco|
|5||Flat guide: Taiwan Hiwin|
|6||Ball screw: Y/Z axis: Taiwan Yintai|
|7||Gear/rack: X axis: Taiwan YYC|
|8||Low voltage apparatus: France schneider|
|9||Terminals: Germany Weidmuller|
|10||Relay: Germany Weidmuller|
|11||Solenoid valve: Germany FESTO|
|12||Pressure switch: Germany FESTO|
|13||Spindle air dry filter: Japan SMC|
|14||Spindle supercharger: Japan SMC|
|15||Cylinder: Taiwan AIRTAC|
From design engineer to workshop experience workers , keep long terms together with LEDE is our honor to have this stable and energetic team family to face each model growth process.
35 years experience in QC system Mr.Sun Lichang set up strict every parts checking system.
17 years experience Assembly workers Mr.Wang Fuxian everyday do the same work of assemble uPVC machine production line. From his assemble hand machine keep working well in customer places with stable working position although customers do not know him well.
"For most people idea, the assemble work is easy and simple work. But I do not think so. Even 0.01mm difference will effect working result. so I must do it in the correct way ! ". --Wang Fuxian
Practical work is the foundation
Q:What's the customer service/after-sales service?
-Details manuals we provided,will give you best machines match based on your output capacity.
-Reply within 12 hours.
-One to one service.
-Engineer available overseas,providing timely technical support,not delay construction period.
-Free training in our factory.
- Local installation and training(if local service center available)
Q:What's the machines warranty?
1 year warranty for machinery parts except consuming parts like tools / knife. During warranty we keep online and local service as you inquiry.
Q:What's the payment terms?
-T/T,30% deposit,70% before shipment
-L/C,100% at sight.
For more details ,please contact with us